25
Farm-Clean
Tuchel Maschinenbau GmbH
Illustration 2
3. Click the handle back; the equipment carrier is now coupled with the Feed pusher.
5.2.2 Angle adjustment of the Feed pusher
The Feed pusher can be placed in an angled position in relation to the direction of
movement. To place in an angled position or release the Feed pusher from its
angled position, lift the pin out and turn the equipment. (see Illustration 1 and 2)
Illustration 1
Illustration 2
5.3 Snow plough
5.3.1 Mounting of the Snow plough
Take the following steps to attach the Snow plough to the machine.
When you (de)couple a tool unit, make sure that the stand is pulled out first.
1. Install the handle as below.
Illustration 1
2. Push the Snow plough in the equipment carrier.
3. Click the handle back; the equipment carrier is now coupled with the Snow plough.
Illustration 2
5.3.2 Angle adjustment of the Snow plough
The Snow plough can be placed in an angled position in relation to the direction of
movement. To place in an angled position or release the Snow plough from its
