Tube-Line TL1700SR, Operator'S Manual

Page: 30 / 55

TL1700SR -
Section 5: Operating Procedure 5-7
Bale Wrap Cut
This machine uses a serrated knife blade to cut plastic film after each bale is ejected from the turntable.
•
Load next bale in the same manner as first bale to create tension on trailing plastic film from tensioner to
unloaded bale.
•
Rotate turntable to begin wrapping next bale. As the table turns, the plastic film should stretch across the
serrated knife and separate from the unloaded bale.