Tube-Line TL1700SR, Operator'S Manual

Page: 50 / 55

TL1700SR -
Section 9: Auto Control Option 9-5
Manual Wrap Mode
To wrap in MANUAL MODE :
1. Set display screen MODE
field to
MANUAL , see pg.9-2 .
2. Load bale onto wrapper turntable.
3. Press and hold FWD remote control button until desired amount of wrap is applied to bale.
4. Release FWD button when turntable is parallel with the frame and UNLOAD decal is located at the front
left corner.
5. When turntable has stopped rotating, press TIP DOWN for 3 seconds to unload the wrapped bale.
6. After wrapped bale is unloaded clear of the bale wrapper, press TIP IP remote control button until the
turntable is fully raised and level.
7. Repeat steps 2 to 7 until wrap job complete.
8. Inspect wrapped bales and patch any holes and/or tears with heavy duty tape.
9.
Turn off display screen and remote control before transporting or leaving work site.