19
Step 2:
After the cover plate removed, please lead one cable (Recommend conductor
core size: 2.5 mm
2
) through the waterproof nut (GRID) and then use E6012 wire crimps
to connect the wires to the terminal of GRIDL, GRIDN and GND2 properly.
Step 3:
Lead another cable (Recommend conductor core size: 2.5 mm
2
) through the
waterproof nut (BACKUP) and then use E6012 wire crimps to connect the wires to the
terminal of BACKUP-L, BACKUP-N and GND1 accordingly.
Note
！
When you removed the cover plate, if the 4 pins connector that
connected with the WIFI/GPRS port is removed, please remember to
re-plug it into the terminal.
Summary of Contents for TSOL-ACU3.0K
Page 1: ...31 TSOL ACU3 0K...
Page 44: ...42 4 Click Add a New Gateway Logger and input the SN of the monitor logger...
Page 49: ...47...
