Tsubaki ZIP CHAIN LIFTER, Manual

Page: 19 / 40

ZIP CHAIN LIFTER
ZIP CHAIN LIFTER
Outline Dimensions: Allowable Lifting Weight 1,000 kg
Three-phase motor, 1,000 mm stroke
ZSL1000S10G1
ZSL1000L10G1
Three-phase motor, 1,600 mm stroke
ZSL1000S16G2
ZSL1000L16G2
*1 The center of gravity of the workpiece should be within this range. If the workpiece center of gravity is outside this range, contact a Tsubaki representative for customization.
*2 Dimensions shown without tolerances will have general tolerances and may be 2 to 5 mm larger than the dimensions shown. Please allow a margin when designing your machinery.
Servomotor, 1,000 mm stroke
ZSL1000M10K1
Servomotor, 1,600 mm stroke
ZSL1000M16K2
*1 The center of gravity of the workpiece should be within this range. If the workpiece center of gravity is outside this range, contact a Tsubaki representative for customization.
*2 Dimensions shown without tolerances will have general tolerances and may be 2 to 5 mm larger than the dimensions shown. Please allow a margin when designing your machinery.
Model
Model
Model
Model
Note: Servomotor driver, motor cable, brake cable, and encoder cable are not included.
They need to be prepared by the customer.
Note: Servomotor driver, motor cable, brake cable, and encoder cable are not included.
They need to be prepared by the customer.
420
1000
1420
1800
Maintenance bar
(option)
A A
100
600
1100
1800
Workpiece center of gravity
(range)* 1
（
1130
）
1100
1260
Hook
1540
1660
1200
4-φ20
anchor hole
4-M16 jack bolt
Cross-section A-A
2200
600
1600
1800
A A
Maintenance bar
(option)
100
600
1800
1100
Workpiece center of gravity
(range)*
1
（ 1130 ）
1100
1260
1200
1540
1660
4-M16 jack bolt
4-
φ
20
anchor hole
Cross-section A-A
Upper limit speed
reduction LS
Hook
1420
420
1000
1800
Use L-shaped plug for servomotor
power supply and brake connector
Maintenance bar
(option)
A A
100
600
1100
1800
Workpiece center of gravity
(range)* 1
（
1130
）
1100
1260
Hook
1540
1200
1660
Cross-section A-A
Lower limit stop
(origin) LS
4-M16 jack bolt
4-
φ
20
anchor hole
2200
1800
600
1600
Use L-shaped plug for servomotor
power supply and brake connector
A A
Maintenance bar
(option)
100
600
1800
1100
Workpiece center of gravity
(range)*
1
（
1130
）
1100
1260
1540
1660
1200
Cross-section A-A
Lower limit stop
(origin) LS
4-
φ
20
anchor hole
4-M16 jack bolt
Hook
Upper limit overrun LS
Upper limit speed reduction LS
Lower limit speed reduction LS
Upper limit stop LS
Lower limit stop LS
Lower limit overrun LS
Lower limit overrun LS
Lower limit stop LS
Lower limit
speed reduction LS
Upper limit overrun LS
Upper limit stop LS
Lower limit overrun LS
Upper limit overrun LS
Lower limit overrun LS
Upper limit overrun LS
17 18