Tsubaki ZIP CHAIN LIFTER, Manual

Page: 36 / 40

Application/equipment
No. of required units units
Worker carrying function
□ Will carry workers □ Will not carry workers
(When lifter is to be used for carrying workers, you will need to confirm product liability laws and sign an MOU.)
Table dimensions
Length
mm × Width mm
Table for cantilevered lifter to be prepared by the customer. Also available upon request; contact a Tsubaki representative.
(Allowable min. height: mm ）
Load object
Fixed load
(Specific name)
Mass including table kg … A
Movable load
Mass kg × No. of items ＝ kg … B
Name ・ Size
Total mass (A+B above) kg
Center of gravity
position
X direction mm ・ Y direction mm
Stroke/cycle time
Required total stroke mm
Total lift time per complete cycle seconds
Operation cycle
complete cycle/hour × hours/day × days/year
Speed
Drive motor
□ Three-phase motor □ Servomotor
Preferred motor manufacturer
Power supply voltage V ・ Hz
Usage environment
□ Indoor □ Other ［ ］
Dust □ None □ Yes
Ambient temperature □ 0 to 40°C □ Below 0°C or higher than 40°C （ ℃ ）
Designation of
paint color
□ Unspecified □ Yes （ Munsell or JPMA no.
）
Additional position
detection sensor
□ Yes (or considering addition) □ Not needed
Rotary encoder □ Yes (or considering use) □ Not needed
Equipment operation and usage (Specify layout, operation, and other necessary information.)
X
Y
ZIP MASTER Technical Sheet
ZIP MASTER Technical Sheet
Options
（ □ None ・ □ Yes ［ ］ ）
□ mm/s □ m/min
Company:
Name:
TEL: FAX:
Email (required):
Address:
35 36