Tsubaki ZIP CHAIN LIFTER, Manual

Page: 17 / 40

ZIP CHAIN LIFTER
ZIP CHAIN LIFTER
ZIP CHAIN LIFTER
1. With three-phase motor
ZSL0050S03G1
ZSL0050S05G2
4.6
300
55
7.5
500
60
50
4.8
2.86
200
400×580
Three-phase/four-pole motor
with non-excitation type brake
0.1kW
E
V
Table dimensions will differ when
using bellows. Contact a Tsubaki
representative for more
information.
1,000 2,000 3,000 4,000 5,000 7,000
1,000
0
2,000
3,000
4,000
5,000
0
Optional Equipment
1,000
Phthalic acid-based,
grey (Munsell N5)
ZSL1000S10G1 ZSL1000L10G1 ZSL1000S16G2 ZSL1000L16G2
5.5
3.18
13.5
720
11
6.35
7.5
750
1,000
420 600
1,600
5.5
3.18
20
1,020
11
6.35
11.5
1,050
2.2kW
3.7kW 2.2kW 3.7kW
Phthalic acid-based,
grey (Munsell N5)
2. With servomotor
ZSL0050M03K1 ZSL0050M05K2
0.85
300
50
1.25
500
55
50
28.6
（ 5,000 r/min ）
5.72
Servomotor (with brake)*
1
400W
1,000
19
（ 2,500 r/min ）
7.62
Servomotor (with brake)* 1
5.0kW
ZSL1000M10K1 Model ZSL1000M16K2
5
1,000
420
750
8.55
1,600
600
1,050
ZSL 1000 M 16 K 2 - E
*1 Servomotor driver, motor cable, brake cable, and encoder cable are not included. They need to be prepared by the customer.
*2 400V AC class is also available. Contact a Tsubaki representative for more information.
Specifications
Dimensions
1,100×1,800
1,100×1,800
200
400×580
ZSL 1000 S 10 G 1 - J
Series Allowable
lifting weight
Speed Stroke Drive Number of
pantograph
stages
Option
Model Numbering
Available ZIP CHAIN LIFTER Range
Ambient Conditions
Allowable
lifting weight
1000 1,000 kg
0050 50 kg
16
10
05
03 1,600 mm
1,000 mm
500 mm
300 mm
J Bellows
T
Tap plate
(Available for
1,000kg type)
Stroke Drive style
G
K
Three-phase motor
Servomotor
Speed
S
L
M
Up to 6 m/min
6 to 12 m/min
12 to 30 m/min
Option
1 Single-stage
2 Dual-stage
Number of pantograph stages
Allowable lifting weight and lifting stroke
Allowable lifting weight (kg)
Nominal speed (m/min)
Pulses per motor revolution (mm)
Operating time (s)
Nominal stroke (mm)
Minimum height (mm)
Table size (mm)
Weight (kg)
Motor
Motor size (kW)
Power supply voltage
Lubrication
Coating
Allowable lifting weight (kg)
Nominal speed (m/min)
(Input motor rpm)
Pulses per motor revolution (mm)
Operating time (s)
Nominal stroke (mm)
Minimum height (mm)
Table size (mm)
Weight (kg)
Motor
Motor size (kW)
Power supply voltage
Lubrication
Coating
Model
*1 400V AC class is also available. Contact a Tsubaki representative for more information.
Maintenance bar for 1,000kg type
Model: ZSL1000MB10
Standard products
1,000kg type/50kg type
Maintenance bar
(Option)
Roller cover
Top/bottom
Full-faced
below
Upper limit overrun LS
4- φ 20
Anchor hole
Upper limit stop LS
Lower limit stop LS
Lower limit speed reduction LS
Upper limit speed reduction LS
Upper limit
mechanical stopper
Zip Chain unit
4-M16 jack bolt
Lower limit overrun LS
Maintenance bar position
1800
1900
1100 1200
1100 1200
1800
1800
1800
1600
(1130)
1100
1100
50 50
1260
1600
60
1000
1420
420
Note: Always use the maintenance bar for safety during maintenance.
The maintenance bar is to be used with a 1,000 mm stroke. Contact a Tsubaki representative if you need to use it with other strokes.
Contact us for the mounting
position and number of tap
plates that need to be mounted.
380/400/400/440V
50/50/60/60Hz
Note: Contact a Tsubaki
representative for voltages other
than those listed above.
Allowable lifting weight (kg)
Lifting stroke (mm)
400V class
Rotary encoder
Maintenance bar
Installation place
Ambient temperature
Relative humidity
Altitude
Shock resistance value
Atmosphere
Mounting direction Indoor not exposed to dust or water
1,000 m or less
Less than 1G
Free from corrosive gases, explosive gases, and steam
Horizontal
Three-phase/four-pole high-efficiency motor
with non-excitation type brake
Acrylic lacquer-based, grey (Munsell N5)
Acrylic lacquer-based, grey (Munsell N5)
200V AC class* 1
Chain: Grease (No. 2)
200V AC class*
2
Chain: Grease (No. 2)
ZSL1000: 0 to 40°C
ZSL1000: 35 to 85
％
RH
ZSL0050: 5 to 35°C
ZSL0050: 5 to 85 ％ RH
With bellows
15 16