TSI Instruments AccuBalance 8370, Operation And Service Manual

Page: 37 / 58

Operations in More Detail 29
(2-second) display rate, you will therefore see less variation in the
displayed values.
In the averaging mode, you may choose between a three-second and a
six-second averaging time period. The A
CCU
B
ALANCE
is shipped set
up in the three-second averaging mode. You can change this by
changing the setting of switch 6 in the battery compartment (see
Changing DIP Switch Settings ).
Changing DIP Switch Settings
You can change flow units and time constants by adjusting the settings
of the DIP switches located inside the battery compartment. To gain
access to the DIP switches, first turn off the A
CCU
B
ALANCE
and lay
down the instrument with the electronic meter facing down as shown
in Figure 12.