TSI Instruments AccuBalance 8370, Operation And Service Manual

Page: 31 / 58

Operations in More Detail 23
1 ft x 4 ft Hood
To assemble and attach the 1 ft x 4 ft hood, carefully follow these 10
steps:
1 Build the 1 ft x 4 ft frame structure as shown in Figure 9 using
four 2 ft aluminum frame tubing pieces, two 1 ft aluminum frame
tubing pieces, four right-angle tubing connectors, and two
straight tubing connectors. Remember to construct the frame so
that all Velcro surfaces face in (toward the center of the structure).
Notice : Make sure that all support pole cups in the aluminum frame
tubing pieces are facing downward.
Figure 9 . Assembled 1 ft x 4 ft frame
2 Unfold the 1 ft x 4 ft fabric hood.
Continue with steps 3 through 10, beginning on page 20.
1 ft x 5 ft Hood
To assemble and attach the 1 ft x 5 ft hood, carefully follow these 10
steps: