Tseng Qtec VGA 1024, Installation Manual

Page: 113 / 123

IN CASE OF DIFFICULTY
If you have problems after installation, one of the following is
most probably the cause.
a. Ensure that all cables are properly connected, and that all
plugs are firmly seated in their sockets.
b. Ensure that the display monitor is properly connected and
that its power is turned on.
Power OFF the computer system and all other connected devices
before checking the following:
c. Ensure that the switches on the Qtec VGA1024 board are set
properly and that the board is seated in the expansion
slot.
d. Ensure that the system motherboard switches/jumper(s ) are
set properly for use with the Qtec VGA1024 board.
e. Ensure that no other switch settings on the motherboard
have been accidentally changed. Refer to the documentation
provided with your computer to determine the correct switch
settings.
If checking these items does not locate the problem, there may be
a malfunction of the computer system, display monitor or the Qtec
VGA1024 board. Please fill-in the Problem Report Form on the next
page to assist your computer Dealer in locating the problem.
-91-