Tseng Qtec VGA 1024, Installation Manual

Page: 29 / 123

10. The Qtec VGA1024 is intended for analog output for maximum
performance. If your display monitor is not capable of
accepting analog input then it must be interfaced with the TTL
9-pin connector on the Qtec VGA1024. TTL monitors are capable
of delivering no more than 640x480 graphics resolution with 16
colors. Please avoid interfacing monitors with the adapter
incorrectly.
11. Your Qtec VGA1024 board can go into any unused slot on the
motherboard. Choose the slot you want to hold the Qtec
VGA1024 board.
1 2
.
Remove the screw which holds the chosen expansion slot rear
panel cover. Remove the cover and set the screw and cover
aside.
13. At this point, you are ready to install your Qtec VGA1024
board into the system. The Qtec VGA1024 board may be
installed in any empty expansion slot on the IBM motherboard.
Refer to the following picture as you do steps 13.a through
13.d.
-20