Tseng Qtec VGA 1024, Installation Manual

Page: 13 / 123

INSTALLATION REQUIREMENTS
IBM Personal Computer
IBM Personal Computers manufactured prior to April 1983 must
have a new ROM module installed on the system board before you
install the Qtec VGA1024.
If you are not certain which ROM module is installed on your
system board, run the following BASIC program.
The program displays the date code of the ROM module installed
on your system board. Enter the program exactly as shown. If
the date displayed is earlier than 10/27/82, a new ROM module
is required. The ROM is contained in the BIOS Upgrade Kit
available from your IBM dealer. The IBM part number is
1501005.
10 DEF SEG=&HF000
20 FOR A=&HFFF5 TO &HFFFF
30 PRINT CHR$ (PEEK(A ) );
40 NEXT
RUN
Additional information on BASIC programs is available in your
BASIC manual.
IBM Personal Computer XT. XT 286. AT. and PS/2 Model 30
The Qtec VGA1024 board is compatible for use in these systems.
Compatible Personal Computers
Check with the dealer or manufacturer of your computer. The
Qtec VGA1024 board is compatible with the IBM VGA Adapter, IBM
Enhanced Graphics Adapter (EGA), IBM Color Graphics Adapter
(CGA) and Hercules standards. Most compatible systems support
these standards. If your computer supports one of these
standards, then the Qtec VGA1024 board will work in your
system.
-4-