background image

          

 

 

 

iii

This license grants a worldwide, royalty-free, perpetual and irrevocable right and license 
to use, execute, perform, compile, display, copy, create derivative works of, distribute 
and sublicense the FreeType Project (in both source and object code forms) and 
derivative works thereof for any purpose; and to authorize others to exercise some or all 
of the rights granted herein, subject to the following conditions: 

z

 

Redistribution of source code must retain this license file (`LICENSE.TXT') 
unaltered; any additions, deletions or changes to the original files must be clearly 
indicated in accompanying documentation. The copyright notices of the unaltered, 
original files must be preserved in all copies of source files. 

z

 

Redistribution in binary form must provide a disclaimer that states that the software 
is based in part of the work of the FreeType Team, in the distribution documentation. 
We also encourage you to put an URL to the FreeType web page in your 
documentation, though this isn't mandatory. 

 
These conditions apply to any software derived from or based on the FreeType Project, 
not just the unmodified files. If you use our work, you must acknowledge us. However, 
no fee need be paid to us. 

3. Advertising 

Neither the FreeType authors and contributors nor you shall use the name of the other 
for commercial, advertising, or promotional purposes without specific prior written 
permission. 
We suggest, but do not require, that you use one or more of the following phrases to 
refer to this software in your documentationor advertising materials: `FreeType Project',  
`FreeType Engine',`FreeType library', or `FreeType Distribution'. 
As you have not signed this license, you are not required to accept it. However, as the 
FreeType Project is copyrighted material, only this license, or another one contracted 
with the authors, grants you the right to use, distribute, and modify it. 
Therefore, by using, distributing, or modifying the FreeType Project, you indicate that 
you understand and accept all the terms of this license. 

4. Contacts 

There are two mailing lists related to FreeType: 

z

 [email protected] 

Discusses general use and applications of FreeType, as well as future and wanted 
additions to the library and distribution. If you are looking for support, start in this list 
if you haven't found anything to help you in the documentation. 

z

 [email protected] 

Discusses bugs, as well as engine internals, design issues, specific licenses, 
porting, etc. 

z

 http://www.freetype.org 

Holds the current FreeType web page, which will allow you to download our latest 
development version and read online documentation. 

 

Summary of Contents for TTP-248M
































Reviews: