8
4. Place an empty paper core onto the ribbon rewind roll. (The diameter of
empty paper core must be larger then 34 mm)
5. Pull the ribbon roll leading edge forward through the ribbon sensor. Attach
the ribbon leading edge (with a tape) to the empty paper core.
6. Manually rotate the ribbon rewind roll until the ribbon overlaps the ribbon
leading edge and stretches tight.
Figure 5. Installation of ribbon.
3.3 Label Roll Installation
1. Insert the label supply roll into the label spindle.
2. Pull the label roll leading edge forward through the black media guide bar,
gap/black mark sensor and place the label leading edge onto the platen
roller.
3. Adjust the label guide to meet the width of the label, and buckle it onto the
black media guide bar.
