TSC TTP-2410MT Series, User Manual

Page: 47 / 87

- 40 -
Peeler Mode Enable the label peel off mode.
Cutter Mode Enable the label cutter mode.
Cutter Batch Cut the label once at the end of the printing job.
Offset
This item is used to fine tune media stop location. Available setting
value is from
“+” to “-” or “0” to “9”.
+000
Shift X
This
item
is used to fine tune print position.
Available setting value is
from
“+” to “-” or “0” to “9”.
+000
Shift Y +000
Reference X
This
item
is used to set the origin of printer coordinate system
horizontally and vertically.
Available setting value is from
“0” to “9”.
000
Reference Y 000
Code page Use this item to set the code page of international character set. 850
Country
Use this option to set the country code.
001
Note: If printing from enclosed software/driver, the software/driver will send out the
commands, which will overwrite the settings set from the panel.