Trycom Technology TRP-C34X User Manual Download Page 34 | Manualshive

Page: 34 / 35

background image

Step6: Keep the TRP-C34X Server in LAN. Also keep the Client PC in LAN.
Step7:

Power ON the TRP-C34X Server and wait till it completely boots PWR LED ON first.

Step8: Power ON the TRP-C34X Client and wait till it completely boots PWR LED ON.
Step9: Connect PC COM Port link TRP-C34X Client COMA~COMB by Cable.
Step10: Plug in TRP-C34X server COMA~COMB by loop back connector.
Step11: RUN “Demo.exe” and select correct baud-rate and data format.

«
...
32
33
34
35
»

Summary of Contents for TRP-C34X




































Reviews:

No comments

Related manuals for TRP-C34X

Brand: Magnum Energy Pages: 2

Brand: Magnum Energy Pages: 62

Brand: Helvest Pages: 2

Brand: Milexia Pages: 17

Brand: Wagan Pages: 44

Brand: PRIZM Pages: 7

Brand: Agilent Technologies Pages: 70

SinePower MSI924

Brand: Waeco Pages: 436

Brand: ViewSonic Pages: 44

Brand: Actox Pages: 36

Brand: Samlexpower Pages: 3

IB-MP3012 series

Brand: Icy Box Pages: 44

Brand: SoundMax Pages: 28

Evershine TLC4000

Brand: Zeversolar Pages: 74

Brand: Linear Technology Pages: 6

Brand: Pocketdish Pages: 2

Brand: MDS Power Pages: 16

Brand: Video Messenger Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands