v) On that event notice that some messages will get printed on the console where you are
executing the above snmptrapd command.
IP Address Report Page
Network management becomes difficult when TRP-C34X is forced into DHCP. Any IP changes
due to DHCP in TRP-C34X are reported to the assigned Host on the Network.
On IP address Report, click the modify box to activate the parameter, and set the IP address,
Port number and time period to Auto report to host.
The default Port number is 4002 and the default Auto Report Period is 10 s.
Password
Password can be set / modified & Disabled through this screen. Maximum length of 7
characters can be supported for TRP-C34X password. Alpha, Numeric & Alpha numeric type of
passwords are supported.
Summary of Contents for TRP-C34X
