IF THE MACHINE GETS BLOCKED
During operation it is possible that a branch or pruning with a diameter higher than
the working capacity of them machine is entered, and blocks the rotation of the
flywheel.
To remove the blockage, ensure that the machine has been turned off, the spark plug
has been disconnected and that the flywheel has no power supply that will make it
rotate while the material is being removed. Once the blockage has been taken out,
the machine can be re-started.
AFTER USE
When you have finished operation of the machine and have turned the engine off:
Allow machine to cool down
Check the machine over to see if there are any irregularities that could impede
your next use
Check fuel and oil levels for next use
