background image

98244C (3/06)

HRC2-10-1D

NOTE:

  It is important to insure proper ventilation.  Allow a

minimum clearance of 6 inches (152 mm) in front and 3
inches (76mm) in the rear of the unit.  If unit is to be in-
stalled in an enclosure, allow the following clearances
around unit 1 inch (25mm) each side, 3 inches (76mm) in
the rear, 3 inches (76mm) inches above wall.

This chiller has been designed for use with potable water
and includes an o-ring seal on the drain plug.  This fitting
should be replaced if the unit is to be used with more
aggressive fluids.

Refrigeration Packages

Installation Instructions

A = 3/8" O.D. TUBE WATER OUT
B = 3/8" O.D. TUBE WATER INLET
C = 3/8" O.D. TUBE TANK DRAIN
D = TEMPERATURE ADJUSTMENT
E = ELECTRICAL

LEGEND:

Reviews: