In order to fully remove the nut
and bolt, use an 8mm Allen key
to counter the force from the
spanner. Remove the nuts and
bolts from the chipper blade.
Once all three have been
removed, take out the chipper
blade.
CAUTION
– THE CHIPPER
BLADE IS SHARP AND CAN
CAUSE INJURY
When retightening the nut and
bolt, the rotation of the spanner
will force the flywheel the
opposite direction. Use the Allen
key against the frame of the
machine as pictured to prevent
the flywheel from rotating whilst
the nut is being tightened.
ADJUSTING BELT TENSION
Remove the protective cover that
sits over the belts with a 13mm
socket.
