TruVision TVB-5412, Configuration Manual

Page: 58 / 90

56 TruVision ANPR IP Camera Configuration Manual
Alarm/event settings
Under Camera Configuration, use the Alarm/Event menu to set the desired parameters
for motion, inputs, outputs and system alarms and events.
A motion detection alarm is triggered when the camera detects motion. However, the
motion alarm is only triggered if it occurs during a programmed time schedule.
Select the level of sensitivity to motion as well as the target size so that only objects
that could be of interest can trigger a motion recording. For example, the motion
recording is triggered by the movement of a person but not that of a cat.
You can define the area on screen where the motion is detected, the level of sensitivity
to motion, the schedule when the camera is sensitive to detecting motion as well as
which methods are used to alert you to a motion detection alarm.
You can also enable dynamic analysis for motion. When there is motion, the area will
be highlighted as green.
Figure 10: Motion detection window
To define a motion detection alarm requires the following tasks to be done:
1. Area settings : Define the on-screen area that can trigger a motion detection alarm
and the detection sensitivity level (see Figure 10, item 1).
2. Arming schedule : Define the schedule during which the system detects motion
(see Figure 10, item 2).