TruVision ANPR IP Camera Configuration Manual
51
Parameter
Description
Incandescent Lamp:
For use with incandescent lighting.
Warm Light Lamp:
For use where the indoor light is warm.
Natural Light:
For use with natural light.
8.
Image Enhancement
This option is only available when the
Day
or
Night
tab under “Scheduled D/N Switch” or “Custom
24-h Settings” has been selected.
Digital Noise Reduction
Digital noise reduction (DNR) reduces noise, especially in low light
conditions, to improve image performance.
Options include: Normal Mode, Advanced, or OFF. Default is Normal.
Noise Reduction Level
Only available when DNR is set to Normal Mode. Set the level of noise
reduction in the Normal Mode. Higher value has a stronger noise
reduction. Default is 50.
Defog Mode
You can enable the defog function when the environment is foggy and
obscures the image. It enhances the subtle details so that the image
appears clearer. Default is OFF.
EIS
Electrical Image Stabilizer reduces the effects of camera vibration for
the image. Default is OFF.
Gray Scale
You can choose the range of the gray scale from 0 to 255 or from16 to
235. Default is 0 to 255.
9.
Video Adjustment
Mirror
Inverts the image. Options are Left/Right, Up/Down, Center, and OFF.
Default is OFF.
Hallway View
To invert the 16:9 aspect ratio, enable the rotate function. Best used
when installing the camera in a scene with a narrow angle of view.
During installation, turn the camera to 90 degrees or rotate the 3-axis
lens to 90 degrees, and then set the rotate mode as On. You will get a
normal view of the scene with 9:16 aspect ratio that ignores needless
information such as the walls. Default is OFF.
Scene Mode
Select the scene as indoor or outdoor depending on the current
environment.
Video Standard
Select PAL (50 Hz) or NTSC (60 Hz) as the video standard.
Capture Mode
Set the desired frame rate to meet the different demands of field of
view and resolution. A higher frame rate may be required in a location
with a lot of movement (such as a money depot).
Lens Distortion
Correction
Cameras that use a motorized lens may experience some image
distortion. Enable this option when using such a lens.
10. Other
Local Output
Select ON or OFF to enable or disable the BNC output. Default is ON.
Note
: Click the
Default
button to default all the image settings.
OSD (On Screen Display)
In addition to the camera name, the camera also displays the system date and time on
screen. You can also define how the text appears on screen.
Summary of Contents for TVB-5412
Page 1: ...TruVision ANPR IP Camera Configuration Manual P N 1073573 EN REV B ISS 01JUN21...
Page 8: ......
Page 90: ......
