AV30 PRE-INSTALLATION REQUIREMENTS | AV30 Pre-Installati on Requirements | v. 3.0
14 / 37
out from the wall) and the flow arrow should be going toward the water heater.
Commodities Needed By Customer
Needed to prime the system and for maintenance
1. You will need a sump pump (minimum 25 ft. head pressure) to prime the system.
Click Here to Purchase a Sump Pump (or see example)- Amazon.com
2. Short piece of garden hose, with hose fittings to connect sump pump to manifold
intake.
Click Here to Purchase (or see example) - Amazon.com
3. Distilled Water (about 20 gallons): You'll need around 50-60 gallons total, including the
chiller requirements.
4. ~35 gallon reservoir
Click Here to Purchase a Reservoir (or see example)-Amazon.com
Contact Hubbell Heaters
Call: (800) 647-3165
Or: (203) 378-2659
WATER HEATER MANIFOLD
The TACO Inline Recirculating Pump is part of the heater manifold that is supplied by TruSteel.
It is highly suggested to connect the power of the pump to a wall switch. Place the wall switch
in a convenient location for your facility operators. This pump essentially powers on the water
heater by supplying flow.
RECIRCULATING PUMP
MODEL
ELECTRICAL
HORSEPOWER
UNIT DIMENSIONS
VR3452-HY1-
FC1A00
115V 1Ø 2.5A
1/100 to 1/4
