TRUST 922Z POWERC@M OPTICAL ZOOM
Trust 922Z PowerC@m OPT ZOOM has a 16 MB internal memory. By default,
photographs and video clips are saved in the internal memory. Its memory can be
expanded with a SD (Secure Digital) or a MMC (Multi Media Card) card.
The photographs and video clips are automatically saved on the memory card when
one has been inserted into the camera. The internal memory will then not be used.
Memory cards can be purchased from, for example, a photography shop.
Note:
To avoid damage to the memory card and the camera or loss of data,
only insert or remove a memory card when the camera has been
turned
off
.
Note:
The internal memory CANNOT be removed.
Follow the instructions given below to insert or remove a memory card.
1.
Turn the camera off.
2.
Open the battery cover.
3.
Insert the memory card into the camera as indicated on the battery
compartment (see Fig. 6). Press the memory card into the slot until it clicks
into place.
or
Remove the memory card by pushing it so that the lock is released. Remove
the memory card from the camera.
4.
Close the battery cover.
The external memory card must first be formatted (see chapter 12.7) for optimal use.
Note:
The memory card can only be inserted into the camera in one way. Do
not force the card into the slot. This could damage both the memory
card and the camera.
12.7. Format
the
memory
For optimal use of the internal memory or a memory card before using, follow steps
bellow to format the internal memory or memory card:
Caution:
All photographs and videos stored in memory will be gone once the
format is proceeded!
1.
Set the camera to the Playback mode (
).
2.
Press the Menu Selection button (5, Fig. 2).
3. Select
‘Erase’.
4.
Select ‘Format’ and click on ‘OK’.
5.
Press ‘OK’ to confirm the format and push Menu button to exit.
13 Installing/Using
camera
applications
13.1.
Install Trust photo site
Trust offers you the possibility to publish your photographs on the Internet at
www.trustphotosite.com. There are a number of conditions attached to the use of this
site. The conditions can be found at www.trustphotosite.com.
This software can be used to upload your photographs to the Trust Photo Site.
Note:
The latest version of the Trust Photo Upload software can always be
downloaded from the Trust website.
1.
Start the Trust Software Installer.
2. Select
‘Install
software’.
3.
Select ‘Trust Photo Upload Software’.
14
