TRUST FAMILYC@M 300 DIGITAL MOVIE
9
UK
5.1.2 High resolution (640 x 480)
The camera is in the high resolution by default when it is turned on.
5.1.3 Highest resolution (1024 x 768)
1. Turn on the camera by pressing the Mode button (10). Two beeps will be heard. The camera will be in
the Hi mode.
2. Press the Mode button (10) and keep it pressed.
3. Press the exposure button (9) once to change the camera to the highest resolution (SHi) and release the
buttons. A beep will be heard when the exposure button is pressed.
The camera is now ready for taking photographs in the highest resolution.
Note
:
The camera will be in the Hi resolution if it is turned off and turned back on again.
5.2 Continuous
mode
When in the continuous mode, the camera will take 4 photographs one after the other. Follow the instructions given
below to set the camera to this mode.
1.
Turn the camera on. The camera will be in the standard mode.
2.
Press the Mode button (10) twice to set the camera to the continuous mode. Symbol 2 (table 2) will appear in the
LCD screen.
3. When the exposure button (9) is pressed, four photographs will be taken one after the other.
Whilst these photographs are being taken, the text “BUSY” will appear in the screen and the counter (6) will
count down from 4 to 1. Whilst counting down, a beep will be heard each time a photograph is taken.
After taking the four photographs, the counter will only have increased by one, although four photographs
have been taken. This is because the counter displays how many recordings have been taken and not the
number of images.
The picture resolution is set in exactly the same way as in the standard camera mode (see chapter 5.1).
5.3 Deleting
recordings
To delete recordings, a choice can be made to either delete all the records or only the last recording.
Photographs should be deleted if “FULL” (symbol 9 in table 2) appears in the screen or if you do not wish to
keep the last recording.
5.3.1 Deleting the last recording
Press the DEL / REMAIN button (8) once. Symbol 10 (table 2) will appear in the LCD screen. Now press the
exposure button (9) to delete the last recording.
5.3.2 Deleting all the recordings
Press the DEL / REMAIN button (8) twice. Symbol 10 (table 2) will appear together with the flashing text ALL
in the LCD screen. Now press the exposure button (9) to delete all the recordings.
Wait approximately 5 seconds until the text BUSY disappears before taking new photographs.
5.3.3 Memory
information
Keep the DEL / REMAIN button (8) pressed. Symbol 7 (table 2) will appear in the LCD screen. The remaining
percentage of memory can now be read on the LCD screen.
