background image

TRUST 960 POWERC@M CCD 

Lens

 

Keep the glass of the lens clean. Use a cotton bud to clean the lens. If necessary, 
use special cleaning liquid for camera lenses. Do not use a different type of cleaning 
product. 

2 Safety 

Carefully read the following instructions before use.  

The TRUST 960 POWERC@M CCD does not require any special 
maintenance. Use a slightly damp, soft cloth to clean the camera. 

Do not use aggressive substances, such as white spirit, to clean the device. 
These may harm the material.  

Do not submerge the device in liquid. This may be dangerous and will 
damage the device. Do not use the device near water. 

Do not repair this device yourself.  

2.1 Batteries 

The Duracell Ultra batteries supplied with the device are not rechargeable. Do 
not try to recharge them, because this may cause them to explode. 

Never throw the batteries onto an open fire. The batteries may explode. 

Never drill holes into the batteries. 

Keep the batteries out of the reach of small children. 

Use AA alkaline batteries with this camera.  
You can also use rechargeable AA NiMH batteries (minimum 1800 mAh). 

When the alkaline batteries (including Duracell Ultra batteries) are empty, ask 
your local authority where you can dispose of them. 

Note:  

Standard AA NiCd batteries are unsuitable for use with this device. 

Note: 

Do not use old and new batteries at the same time, because the old 
batteries may deplete the new ones. 

Note: 

The batteries should be removed if the camera is not going to be used 
for some time. This will save the battery power. 

3 Approval 

 

This device meets the essential requirements and other relevant conditions of the 
applicable European directives. The Declaration of Conformity (DoC) is available at 
www.trust.com/13806/ce. 

Summary of Contents for 13806



































Reviews: