Trust 13806, User Manual

Page: 20 / 34

TRUST 960 POWERC@M CCD
12.2 Menu settings
The following settings can be altered in the menu when the camera is in the
‘Playback’ mode: Delete, Slide show and Protect.
1.
Set the camera to the ‘Playback’ mode.
2. Press the ‘Menu’ button.
3. Scroll through the functions by pressing the control button up and down.
Confirm an option by pressing the control button to the right. The next menu
will then be displayed.
Press the ‘Menu’ button to return to the previous level.
4. See the table below for a summary of the functions.
Point Options Comments
Delete Image
Delete All Delete
Format
Delete a photograph or video clip, delete all
the photographs and video clips or format
the memory.
Slide Show 1, 3, 5, 7, 9 sec Time delay setting for a slide show.
Unlock Protect
Lock
Protection to prevent photographs or video
clips from being deleted.
Print
(1)
X0 Æ X9 Set number of copies to be printed on a
printer.
Table 12: Menu settings
(1) This option is only available when a memory card has been inserted into the
camera.
12.2.1 Deleting photographs and video clips
Deleting a photograph or a video clip
1. Open the menu.
2. Select ‘Delete’.
3. Select ‘Delete Image’.
4. Select ‘Yes’ to delete the image.
Select ‘No’ to cancel the deletion.
Note:
Photographs and video clips cannot be deleted if they are protected
against being deleted. Remove the protection if you wish to delete a
photograph or a video clip.
Deleting all the photographs and video clips
1. Open the menu.
2. Select ‘Delete’.
3. Select ‘Delete All’.
4. Select ‘Yes’ to delete all the photographs and video clips.
Select ‘No’ to cancel the deletion.
Note: All the photographs and video clips will be deleted. The photographs
and video clips protected against being deleted will not be deleted.
Formatting the memory
1. Open the menu.
2. Select ‘Delete’.
3. Select ‘Format’.
16