3
DES-26C
12496
11.4 lb (with no fuel)
Gas string trimmer, curved shaft
1 Hp
26 cc
8000 RPM
Nylon line
17”
0.08 in to 0.1 in
Loop handle
30 minutes idle per fuel tank consumed.
Maximum 6 hours daily.
500 cc
ENGLISH
• The string trimmer has an air-cooled 2-cycle motor using a mix of unleaded gasoline and high quality self-propul-
sion oil with fuel stabilizer specified for air-cooled two-cycle motors.
• The motor is certified to run with unleaded gasoline for vehicles with 87 or more ([R+M]) octane level.
• Do not use any type of gasoline premixed with oil bought in service stations such as gasoline for motorcycles.
• Do not use automotive oil or oil for 2-cycle outboard motors oil.
• The mix ratio should be 40 parts gasoline per 1 part oil (40:1 ratio). Prepare the mix in a gasoline-approved
container. Always mix thoroughly before pouring in the motor tank.
Do not use fuel mix stored longer than 7 days. Make small amounts of mix.
Never smoke near fuel, the gasoline filling up area or where the oil mix is being prepared or when
operating the tool.
Any attempt to start the string trimmer with no oil added to the fuel mix will damage to the string
trimmer.
Fuel specifications
WARNING
CAUTION
WARNING
Technical data
Code
Description
Net Weight
Fuel Tank
Motor Displacement
Maximum Motor Performance
Speed
Cutter Head
Nylon line diameter
Handle
Work Cycle
Cutting Width
Mix
1 liter
1
L
+
=
40:1
ratio
5 capfuls oil
Gasoline
Use the or ACT- 2T OIL** cap as measure,
mix 5 capfuls oil per each liter gasoline.
A wrong mix may cause the motor to throw a rod causing
expensive repairs!
To prolong the useful life of the motor use two-cycle synthetic motor oil.
* 1 gallon = 3,78 liter ** Not included
