D
D
Disc holder shaft
9
Start Up
A
A
B
B
C
C
1
1
3
2
• The disc holder is used with serrated cutting discs,
abrasive discs and polishing discs.
1.
Fit the disc holder (
A
) into the rotary tool as you do the
other accessories. (See page 8).
2.
Using the screw (
B
), secure the disc you need, firmly
tightened with the screwdriver tip in the accessory
adjusting wrench (
C
). While tightening the disc, keep the
shaft lock depressed (
D
).
• Use care not
tightening the discs in excess. They
might break.
Sandpaper ring shaft
1.
Insert the sanderpaper ring (
A
) in the grain sander (
B
)
more suitable for the job.
2.
Install the stud in the Moto - Tool as you do for the
other accessories. (See page 8).
3.
Tighten the stud screw (
C
) ) to secure the sander. Keep
the shaft locked (
D
) pressed while tightening the screw.
ENGLISH
CAUTION
