2
This manual provides instructions for the Installation, Operation, and Maintenance of the TRUFLO DAP ANSI
Centrifugal Process Pump. This manual covers the standard production and common options that are
available. For special options, supplemental instructions are supplied. This Manual must be read and fully
understood before installation and start-up.
The design, materials, and workmanship incorporated in the construction of TRUFLO pumps make them
capable of giving, trouble-free service. The life and satisfactory service of any mechanical unit, however,
are enhanced and extended by correct application, proper installation, periodic inspection, condition
monitoring, and careful maintenance.
This instruction manual was prepared to assist operators in understanding the correct methods of installing,
operating, and maintaining these pumps.
TRUFLO shall not be liable for physical injury, damage or delays caused by a failure to observe the
instructions for Installation, Operation, and Maintenance contained in this manual.
Warranty is valid only when genuine TRUFLO parts are used.
Use of the equipment on a service other than stated in the warranty card will nullify the warranty, unless
written approval is obtained in advance from TRUFLO.
Additional manuals can be obtained by contacting your local TRUFLO representative or by calling 1-800-
789-7864.
