Page 18
The Physical Keypad is used
to lock and unlock the door,
and program functions
PROGRAMMING PHYSICAL KEYPAD
The time between inputs can be no
longer than 5 seconds. After which
the programming process will be
terminated.
The batteries need to be installed in
order for the Reset Button to work.
It is preferred that the
A
delete the
lock from their device instead of
resetting manually.
If the
A
resets the lock manually,
and does not delete the lock from
their device first, the lock may
not be able to work with that
account again.
If you have connected the lock to
the My Key Application, the default
Passcode “1234” will no longer
work; and you will have to use the
AP
from the App, which should be
changed after connecting (see Lock
Settings step 3)
1. Turn On/Off Auto Lock Function
a.
Input the
AP
b.
- Green light and beep
c.
5
d.
e.
Input time (20 - 900 seconds, and 00 to turn off)
f.
- Green light and beep
2. Sound Off
a.
Input the
AP
b.
- Green light and beep
c.
6
d.
e.
1
f.
- Green light and no beep
3. Sound On
a.
Input the
AP
b.
- Green light and no beep
c.
6
d.
e.
2
f.
- Green light and beep
4. Restore Factory Settings
a.
Press and hold the reset button on the PCB board for three seconds (Remove cover, The reset button is
located inside the back panel, See image below)
b.
The old Administrator of the lock deletes the lock from the App (Must be done near lock)
Reset Button
OR
VERY IMPORTANT
Summary of Contents for 1742002
Page 1: ...M1742002 1742006 V1 Bluetooth Square Electronic Deadbolt...
Page 24: ...Page 22 Page Intentionally Left Blank...
Page 26: ...Page 24 BACK OF TEMPLATE...
Page 30: ......
