Pet Stock Twin Operators Manual Aug 2020 v7.0
Page 56
© Tru Blu Dog Wash 2016
Turn the wash gun back on and wash anything that remains in the under-floor
area down the drain in the middle of the floor area, take note to wash the
bottom side of the blue tilt floor. Turn gun off.
Now remove the cylindrical filter from the drain in the middle of the floor. This
simply pulls out, and has a small lip to enable removal. Empty contents into the
rubbish; do not flush down any drains. While this filter is removed, do not wash
or flush anything down the dog wash drain.
While the filter is removed, place the wash gun in the drain, set the wash gun
to “JET”, rotary dial selection to RINSE and flush the drain. Run the water
gun for 20 seconds, if there are issues with the water draining away you may
need to contact your plumber. Replace the cylindrical filter, and put the
stainless-steel filter back into position.
Wash Gun
Set to Jet
Rotary dial set
to Rinse
Place the wash gun in the drain press on button,
you don’t need to hold the gun place
