Z:\Build\Pet Stock\Pet Stock Twin Operators Manual Aug 2020 v7.0.docx
1 K9000 Twin Dog Wash System Specifications
SYSTEM WITHOUT ON BOARD HOT WATER UNIT
Power
240V
25 AMP
WATER Inlet Pressure (Min)
40psi / 275kpa
Hot
½” Ball valve
Cold
½” Ball valve
WATER Inlet Pressure (Max)
72psi / 500kpa
Hot
½” Ball valve
Cold
½” Ball valve
COLD WATER Inlet temperature
Minimum
5 Degrees Celsius
Maximum
30 Degrees Celsius
HOT WATER Inlet temperature
Minimum
55 Degrees Celsius
Maximum
65 Degrees Celsius
Factory Set water temperature
35 Degrees Celsius at wash gun
WATER Maximum Operating Pressure
50psi / 350kpa
Factory set via water regulator
FILTRATION x2
Primary
Stainless steel mesh filter
Secondary
Vinidex DBA Lic. No. WMKA20071
Back Flow Prevention Device
Connections to be protected by a “high hazard” backflow prevention device. i.e.
“RPZ” or Registered “Air-GAP” Recommended Watts 009M3-AUS RP 15 or
20mm AS2845.1 Lic WMKA1335
WASTE x2
50mm DIA Outlets as well as, a minor trade waste application to be made to the
local water regulator (Contact your local water authority trade waste division)
SYSTEM WITH ON BOARD HOT WATER UNIT
Power Unit
240V
25 AMP
Power Hot Water
Stiebel Eltron DHB-E 27 AU
415V
40 AMP
WATER Inlet Pressure (Min)
40psi / 275kpa
Cold
¾” Ball valve
WATER Inlet Pressure (Max)
72psi / 500kpa
Cold
¾” Ball valve
COLD WATER Inlet temperature
Minimum
5 Degrees Celsius
Maximum
30 Degrees Celsius
Factory Set water temperature
35 Degrees Celsius at wash gun
WATER Maximum Operating Pressure
50psi / 350kpa
Factory set via water regulator
FILTRATION x2
Primary
Stainless steel mesh filter
Secondary
Vinidex DBA Lic. No. WMKA20071
Back Flow Prevention Device
Connections to be protected by a “high hazard” backflow prevention device. i.e.
“RPZ” or Registered “Air-GAP” Recommended Watts 009M3-AUS RP 15 or
20mm AS2845.1 Lic WMKA1335
WASTE x2
50mm DIA Outlet as well as, a minor trade waste application to be made to the
local water regulator (Contact your local water authority trade waste division)
DIMENSIONS / WEIGHT
Dimensions
Length 3600mm / Height 1850mm / Depth 600mm
Weight
Left Hand Side 260kg – Right Hand Side 90kg (Total weight 350kg)
APPROVALS
Risk assessment performed by IAPMO (NATA accredited laboratory)
IEC 61000-6-3:2006 Electromagnetic compatibility (EMC) – Part 6.3: Generic standards – Emission standard for residential,
commercial and light-industrial environments
AS/NZS 60335.2.75:2005 + Admt 2009 in relation to vending machines AS 60204.1:2005 ‘Safety of machinery – Electrical
equipment of machines, General Requirements’
IEC 61000-6-1: 2005 Electromagnetic compatibility (EMC) Generic standards. Immunity for residential, commercial and light-
industrial environments.
ATS 5200.101:2005 – Strength of Assembly
EPA Registered Noise tested rating of 66dba @ 4 meters
USAGES
Water usage: 16 to 20 litres per minute, where both units in operation (40-50 litres per single dog wash)
Average power usage per wash cycle is .76kwh (dependent on hot water source)
