158 mm
4
Blind Nut (4mm)
Washer (4x8mm)
Screw (4x25mm)
Washer (4x8mm)
Screw (4x35mm)
Washer (4x8mm)
Nut (4mm)
Spring Washer (4mm)
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x400mm)
Set Screw (2mm)
Washer (2mm)
Linkage Stopper
1
1
1
1
1
4
4
Washer (4x8mm)
4
Rod (2x400mm)
Blind Nut (4mm)
Screw (4x25mm)
Set Screw (3x4mm)
4mm
5.2mm
Blind Nut
4
Blind Nut (4mm)
Engine mount (68x105mm)
Linkage Stopper
4
4
12
4
Washer(4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
2
4
Screw (4x25mm)
2
Fuel tank (550cc)
1
1
Clevis
In case of 2-cycle & 4-cycle engine.
1
Plastic tube (2x400mm)
2
2
2
Clevis
Washer(3x15mm)
Lock Nut (3mm )
1
Screw (3x65mm)
4
4
4
Clevis
Copper joiner
Aluminum tube(3x6mm)
4
4
Screw (3x10mm)
Nut (2mm )
4
Washer(2x5mm)
Assemble the throttle linkage.
Drill four holes at the diameters as shown for engine
mount.
The side view when the engine install completion.
Assemble the engine.
The front view of the engine install completion
8
43
42
41
40
39
Accessory list for the coming installation steps.
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Set screw (3x4mm)
Washer (2mm)
Set screw (3x4mm)
1
1
1
1
Fuel supply line
Fuel spray line
Air pressure line
Drill a smallhole in appropriate position for throttle.
Install the switch and the throttle servo
Epoxy the fuel tank in the fuselage.
Notice the position of the fuel tank in the fuselage.
Install the throttle servo to appropriate position in the
fuselage.
The sketch map when the engine install completion.
Assembly of the fuel tank.
9
49
48
47
44
46
45
