Collar
Tail landing gear
Collar
Assemble the tail landing gear to the wheel steeling
mounts as below.
16
TP Screw (2.3x8mm)
17
2
Pvc part
4
Plastic tube(5x30mm)
2
Drop tank
TP Screw (2.3x12mm)
8
TP Screw (2.3x12mm)
3mm
18mm
Retainer
1
Canopy
Rod (2x300mm)
Clevis
2.0mm
TP Screw(3x20mm)
Washer (3x6mm)
4
4
4
8
Ply (15x15x3mm)
1.5mm
Ply (15x15x3mm)
Ply (15x15x3mm)
The sketch map when the tail landing gear be
installed to the fuselage.
Connect the nose arm to the horn in the rudder.
Assemble the tail landing gear covering.to the
fuselage as below.
Assemble the wheel steeling mounts to appropriate
position.
62
63
61
65
64
12
Accessory list for the coming installation steps.
80 mm
2
Wood dowel (6x50mm)
2
2
Blind Nut (6mm)
Screw(6x50mm)
3
Pin hinge(2.5x48mm)
Using rubber tubu cover
the middle of the hinges
before installation in case
the epoxy glue get into.
Make sure hinges are
mounted in the same line.
1
Stab joiner (12x250mm)
6
3
2
Pin hinge(24x24mm)
Pin hinge(2.5x48mm)
Steel wire (0.5x3000mm)
1
U-style wire (3mm)
12 mm
12 mm
80 mm
16mm
64mm
78mm
90mm
6mm
2.5mm
4
Wood dowel (4x30mm)
1
Rib template (3mm ply)
6.2mm
Blind Nut
Drill holes to appropriate position in the rudder and
epoxy the ping hinges in them
Drill holes to appropiate position in the wings and
epoxy wood dowels in them
Drill holes to relevant position in the fuselage
Mount the wings to the fuselage with screw .
Accessory list for the coming installation steps.
Epoxy the belly pants to main wing and drill holes to
relevant position on the belly pants
5
26
25
22
24
23
