Retracts strut
LockNut(4mm)
Wooden Block
Bushing (8x4mm)
TP Screw (3x20mm)
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
18mm
110mm
Center
line
100mm
Note:rubber wheels oleo struts
and retracts are optional.
6mm
2
Wood dowel (6x30mm)
1
Rib template (2mm ply)
Rib template (2mm ply)
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
6mm
Rib template (2mm ply)
Joint the main wing togeter tightly .
Assemble the gear doors and the wheels to the retracts.
Drill holes for pulling out the servo extension line.
Assemble the retract
According to the rib template drill holes to another
main wing.
Main wing joiner
1
4
21
20
19
16
18
17
8
TP Screw (2.3x8mm)
8
1.5mm
4
Ply (15x15x3mm)
Ply (20x20x6mm)
Bulge point
1.5mm
10
TP Screw (2.3x8mm)
10
Ply (15x15x3mm)
TP Screw (2.3x8mm)
Cut off the surplus portion from the canopy carefully.
Assemble the canopy to the canopy mount with screw.
Epoxy the exhaust to the cowling from inner of the cowing.
Trim the cowling for engine and muffler
Epoxy plies appropriate position inside the
fuselage as below and assemble the cowling.
Epoxy the plies to the bulges.
67
66
69
70
68
13
71
