25
MONTAJE
ESPECIFICACIONES*
Peso aproximado de la unidad (sin la batería) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.25 - 8.25 libras (3.3 - 3.7 kg)
Volumen de aire** (medido en: salida de la sopladora / tubo de la sopladora) . . . . . . . . . . . . . . . . . . . . . . . 545 / 450 pies
3
/min (15 / 12 m
3
/min)
Velocidad de aire (Pico)** (medido en: salida de la sopladora / tubo de la sopladora) . . . . . . . . . . . . . . . . . . . . . . 90 / 125 mph (145 / 200 km/h)
Velocidad de aire (Promedio)** (medido en: salida de la sopladora / tubo de la sopladora). . . . . . . . . . . . . . . . . . 75 / 100 mph (120 / 160 km/h)
Tipo de batería (Modelo 4144) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V, Ión-litio de 4 Ah
Tipo de batería (Modelo 6216) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V, Ión-litio de 6 Ah
Peso aproximado de la batería . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.25 - 3.75 libras (1.5 - 1.7 kg)
Temperatura óptima de carga . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32° a 104° F (0° a 40° C)
Voltaje de entrada del cargador de baterías . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 V 60 Hz CA únicamente
Salida del cargador de baterías . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 A 42 V CC
Tiempo aproximado de carga (Modelo 4144). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 minutos
Tiempo aproximado de carga (Modelo 6216). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 minutos
Peso aproximado del cargador de baterías . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.75 - 3.25 libras (1.2 - 1.5 kg)
* Todas las especificaciones se basan en la información más reciente sobre el producto disponible al momento de la impresión. Nos
reservamos el derecho de realizar cambios en cualquier momento sin previo aviso.
** Medición conforme a la norma ANSI B175.2.
ADVERTENCIA:
A fin de evitar lesiones personales
graves y daños a la unidad, pare el motor y extraiga la
batería antes de instalar o extraer el tubo de la sopladora.
ADVERTENCIA:
A fin de evitar que se produzcan
lesiones personales graves, no opere nunca la unidad sin
el tubo de la sopladora firmemente instalado.
INSTALACIÓN Y EXTRACCIÓN DEL TUBO DE LA
SOPLADORA
Instalación del tubo de la sopladora
1. Coloque la unidad sobre una superficie plana y nivelada.
2. Alinee la ranura del tubo de la sopladora con la lengüeta de la
salida de la sopladora (Fig. 1).
3. Oprima el tubo de la sopladora sobre la salida de la sopladora
hasta que la lengüeta se trabe firmemente en la ranura (Fig. 1).
Extracción del tubo de la sopladora
1. Coloque la unidad sobre una superficie plana y nivelada.
2. Oprima firmemente la lengüeta hacia adentro y tire del tubo de
la sopladora para sacarlo de la salida de esta (Fig. 1).
Fig. 1
Salida del soplador
Tubo de la
sopladora
Lengüeta
Ranura