![background image](http://html.mh-extra.com/html/troy-bilt/tb4300/tb4300_operators-manual_1172693011.webp)
11
OPERATION
CHECKING THE BATTERY CHARGE LEVEL
Press the charge meter button on the battery. The number of lights
that illuminate will indicate the current charge level of the battery
(Fig. 7). If all four lights are dark, charge the battery before any
further use.
NOTE:
While in use, lithium-ion batteries provide power with
minimal power fade. When the battery is fully discharged, it will
immediately cut power to the unit and require charging.
Fig. 7
Charge Meter
Button
75% - 100%
50% - 75%
25% - 50%
0% - 25%
WARNING:
Do not expose power tools to rain or wet
conditions.
HOLDING THE UNIT
•
Stand in the operating position (Fig. 8). Stand up straight. Do not
bend over.
•
Keep feet apart and firmly planted.
•
Hold the unit with a firm grip.
•
Hold the unit at waist level.
WARNING:
Always wear eye, hearing, hand, foot and body
protection to reduce the risk of injury when operating this unit.
Wear a face mask or dust mask if the operation is dusty.
WARNING:
To prevent serious personal injury, never
operate the unit without the blower tube firmly installed.
TIPS FOR BEST RESULTS
•
Conserve water by using the blower instead of a hose to
perform many outdoor cleaning actions.
•
Operate the unit only at reasonable hours, not early in the morning
or late at night when people might be disturbed. Comply with
times listed in local ordinances. Usual recommendations are 9:00
a.m. to 5:00 p.m., Monday through Saturday.
•
To reduce noise levels, operate the unit at the lowest speed
needed to do the job. Limit the number of pieces of power
equipment used at any one time.
•
Use rakes or brooms to loosen debris before operation.
•
In dusty conditions, slightly dampen surfaces.
•
Watch out for children, pets, open windows and freshly washed
cars. Blow debris safely away. Never direct the unit toward
anyone while the unit is in operation.
•
Sweep the unit from side to side with the blower tube several
inches above the ground. Slowly advance, keeping the
accumulated debris in front of the operator.
•
Clean up after operation. Dispose of debris appropriately.
•
Remove the battery from the unit when it is not in use.
Fig. 8