![background image](http://html.mh-extra.com/html/troy-bilt/tb4300/tb4300_operators-manual_1172693012.webp)
12
MAINTENANCE
WARNING:
To prevent serious injury, never perform
maintenance on the unit while it is running. Always remove
the battery to prevent the unit from starting accidentally.
Always allow the unit to cool before maintaining the unit.
Before maintaining the battery charger, always unplug it
from the power outlet.
MAINTAINING THE BATTERY CHARGER
•
Keep the battery charger clean and clear of debris. Do not allow
foreign material into the charging dock or onto the terminals (Fig.
10). Inspect the battery charger for foreign material before each use.
•
Make sure the charger has not been shorted by debris. Inspect
the terminals for soot and signs of melting. Do not attempt to
use a shorted charger.
Fig. 10
Terminals
Charging Dock
USING THE BOOST BUTTON
Press the boost button to switch between MAX and ECO modes, as
needed (Fig. 9).
•
MAX
mode provides maximum power for tough jobs.
•
ECO
mode conserves energy for maximum run time. ECO mode
is appropriate for most jobs.
NOTE:
The unit will reset to ECO mode a few seconds after the
motor is turned off.
Fig. 9
Boost Button