background image

15

Storing Your Log Splitter

Prepare your log splitter for storage at the end of the 
season or if the log splitter will not be used for 30 days or 
more.

WARNING: Never store machine with 
fuel in the fuel tank inside of building 
where fumes may reach an open flame 
or spark, or where ignition sources are 
present such as hot water and space 
heaters, furnaces, clothes dryers, 
stoves, electric motors, etc.

1.  Clean the log splitter thoroughly.

NOTE

: We do not recommend the use of pressure wash-

ers or garden hose to clean your unit. They may cause 
damage to bearings or the engine. The use of water will 
result in shortened life and reduce serviceability.

2.  Wipe unit with an oiled rag to prevent rust, especially 

on the wedge and the beam.

3.  Drain fuel tank. Always drain fuel into approved 

container outdoors, away from open flame. Be sure 
that engine is cool before draining the fuel. Do not 
smoke while handling fuel. 

WARNING

5

Maintaining 

Your Log 

Splitter

4.  Start the engine and let it run until the fuel lines and 

carburetor are empty. 

5.  Remove spark plug. Holding a rag over the cylinder 

hole, pour approximately 1/2 ounce (approximately 
one tablespoon) of engine oil into cylinder and crank 
slowly to distribute the oil. 

6.  Replace spark plug.
7.  Do not store gasoline from one season to another. 
8.  Replace your gasoline can if it starts to rust. Rust 

and/or dirt in the gasoline will cause problems. 

9.  Store unit in a clean, dry area. Do not store next to 

corrosive materials, such as fertilizer. 

NOTE

: If storing in an unventilated or metal storage 

shed, be certain to rustproof the equipment by coating 
with a light oil or silicone.

Never store machine 

with fuel in the fuel 

tank inside of building 

where fumes may 

reach an open flame 

or spark, or where 

ignition sources are 

present such as hot 

water and space heat-

ers, furnaces, clothes 

dryers, stoves, electric 

motors, etc.

NOTE: We do not 
recommend the use of 
pressure washers or 
garden hose to clean 
your unit. They may 
cause damage to bear-
ings or the engine. The 
use of water will result 
in shortened life and 
reduce serviceability.

Summary of Contents for 24AF572B766





















Reviews: