Operation
5
16
Safety Interlock Switches
This tractor is equipped with a safety interlock system for the
protection of the operator. If the interlock system should ever
malfunction, do not operate the tractor. Contact an authorized
Troybilt service dealer.
•
The safety interlock system prevents the engine from
cranking or starting unless the parking brake is engaged,
and the PTO
(Blade Engage)
lever is in the disengaged (OFF)
position.
•
The engine will automatically shut off if the operator leaves
the seat before engaging the parking brake.
•
The engine will automatically shut off if the operator leaves
the tractor’s seat with the PTO
(Blade Engage)
lever in the
engaged (ON) position, regardless of whether the parking
brake is engaged.
•
With the ignition key in the NORMAL MOWING position,
the engine will automatically shut off if the PTO
(blade
engage)
lever is moved into the engaged (ON) position with
the speed control in Reverse.
WARNING!
Do not operate the tractor if the
interlock system is malfunctioning. This system was
designed for your safety and protection.
Reverse Caution Mode
(Models equipped with ignition switch module)
WARNING!
Use extreme caution while operating
the tractor in the REVERSE CAUTION MODE. Always
look down and behind before and while backing. Do
not operate the tractor when children or others are
around. Stop the tractor immediately if someone
enters the area.
The
REVERSE CAUTION MODE
position of the key switch
module allows the tractor to be operated in reverse with the
blades (PTO) engaged.
IMPORTANT:
Mowing in reverse is not recommended.
To use the
REVERSE CAUTION MODE
:
IMPORTANT: The operator
MUST
be seated in the tractor seat.
1.
Start the engine as instructed on page 16 under Starting The
Engine.
2.
Turn the key from the NORMAL MOWING (Green) position
to the REVERSE CAUTION MODE (Yellow) position of the
key switch module. See Figure 5-1.
3.
Depress the REVERSE PUSH BUTTON (Orange, Triangular
Button) at the top, right corner of the key switch module.
The red indicator light at the top, left corner of the key
switch module will be ON while activated. See Figure 5-1.
Start
position
Indicator
Light
Reverse
Push
Button
Normal
Driving
Mode
Stop
position
Reverse
Caution
Mode
Position
Figure 5-1
4.
Once activated (indicator light ON), the tractor can be driven in
reverse with the cutting blades (PTO) engaged.
5.
Always look down and behind before and while backing to make
sure no children are around.
6.
After resuming forward motion, return the key to the NORMAL
MOWING position.
Summary of Contents for 060-1878-2
Page 35: ...Notes 35 ...
Page 87: ...36 Notes ...
