16
EN
dehumidifier TTK 70 HEPA
5. Insert the air inlet cover back into the device.
Cleaning the air filter
Note
Ensure that the air filter is not worn or damaged. The
corners and edges of the air filter must not be
deformed or rounded. Before reinserting the air filter,
make sure that it is undamaged and dry!
The device is equipped with a filter (prefilter) located in the air
inlet cover.
The filter has to be cleaned as soon as it is dirty. It becomes
clear that it is contaminated if the device's performance is
reduced (see chapter Errors and faults).
1. Remove the cover of the air inlet.
2. Remove the filter from the cover.
3. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
4. Allow the filter to dry completely. Do not insert a wet filter
into the device!
5. Reinsert the air filter into the cover.