EN
3
vertical heater TES 200
Warning
Do not use the device in small rooms if persons are
present who cannot leave the room independently and
who are not under constant supervision.
•
Do not use the device in potentially explosive rooms and
do not install it there.
•
Do not use the device in aggressive atmosphere.
•
Do not use the device in atmospheres containing oil,
sulphur, chlorine or salt.
•
This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.
•
Only put up the device in an upright, stable position on firm
ground.
•
Make sure that the air inlet and outlet are not obstructed.
•
Make sure that the suction side is kept free of dirt and
loose objects.
•
Do not place the device on combustible ground.
•
Never insert any objects or limbs into the device and never
use it as source of ignition.
•
Do not cover or transport the device during operation.
•
Do not use the device with wet or damp hands.
•
Let the device dry out after a wet clean. Do not operate it
when wet or when in moist surroundings.
•
Do not expose the device to directly squirting water.
•
Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.
•
Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
•
The electrical connection must correspond to the
specifications in chapter Technical data.
•
Insert the mains plug into a properly secured mains
socket.
•
Observe the device's power input, cable length and
intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical
overload.
•
Disconnect the device from the mains, if it is not in use.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Do not sit on the device.
•
When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.
•
Do not use the device in immediate proximity to curtains,
beds or sofas.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
Only use original spare parts, for otherwise safe and
functional operation cannot be ensured.
•
Allow the device to cool down before transport and / or
maintenance work.
•
Do not use this device near bathtubs, shower trays,
swimming pools or other water containers. Risk of electric
shock!
Summary of Contents for TES 200
