Trotec TES 200, Original Instructions Manual

Page: 7 / 27

EN 7 vertical heater TES 200
Device depiction
1
2
3
4
5
6
7
8
9
No. Designation
1 Blowing-out tower (DualDecon version depicted)
2 Connections and main switch
3 Wheel
4 Foot
5 Air inlet with air filter
6 Display and button
7 HEPA air filter
8 Transport handle
9 Cable holder
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with a
transport handle and two wheels.
Wear foot protection
Wear suitable foot protection transporting the device.
Risk of injury by twisting your ankle.
• Remove all packing materials which serve to protect the
device during transport.
• Should the device be damaged, please contact the
responsible dealer or manufacturer, where the purchase
was made.
• Carefully tilt the device. Do not incline more than
necessary.
• Carefully set the device back down again.
• The device may only be lifted at the points provided with
lifting gear intended for handling. The carrying capacity of
the lifting gear must be suitable for the weight of the
electric heater (see technical data).
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• in an upright position where it is protected from dust and
direct sunlight
• with a cover to protect it from invasive dust, if necessary
• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
• Have the device checked once a year by an electrically
skilled person at any rate.