SpeedMarker 300 /
ProMarker 300
Ausgabe 1.0
Technische Änderungen vorbehalten.
TROTEC Produktions- u. Vertriebs GmbH
Linzer Straße 156, A
– 4600 Wels
Seite
32
von 42
X31
– External Panel
The connector
X31
may be used to connect an external control panel such as that located on the front of the laser
module.
If no external panel is connected, the supplied connector must be used with the bridging devices.
X51
Laser control. This is connected to
X53
on the PC.
Only use the original cable supplied.
X61
– Extraction System
This connector is used to control, start and stop a Trotec extraction unit.
Only use the original cable supplied.
X71
– Start / Stop
The
X71
connector is already wired regarding the configuration of your SpeedMarker 300 / ProMarker 300.
