EN
12
oil heater IDX 30 D
Opening the filter housing
1. Unscrew the pressure gauge.
0,6
0
,8
1
0
0,2
0,4
2. Loosen the hexagonal bolts at the filter housing.
3. Remove the filter housing with filters and sealing.
Removing filters for cleaning or replacement
1. Remove the two filters from the filter housing (33).
30
31
32
33
2. Check both filters for dirt or damage.
Replace the prefilter (31) if needed.
If required, clean the foam filter (32) using a slightly damp,
soft, lint-free cloth. If the foam filter is heavily
contaminated, clean it with warm water mixed with a
neutral cleaning agent.
3. Allow the foam filter to dry completely. Do not put any wet
filters into the device.
