Tropos 7320 Router Installation Guide
vi
installation, you may be exposed to hazardous environments and high voltage. Use caution when
installing the outdoor system.
This apparatus must be connected to earth ground.
Do not open the unit — risk of electric shock inside.
Risque d'électrocution. Ne pas ouvrir l'unité.
Caution
You are cautioned that any change or modification not expressly approved in this
manual could void your authority to operate this equipment.
Les changements et modifications, non expressément approuvés dans le présent manuel,
peuvent entraîner une interdiction d'utiliser cet appareil pour l'utilisateur.
Service
There are no user-serviceable parts inside. All service must be performed by qualified
personnel.
Vous ne devez pas réparer les pièces se trouvant à l'intérieur de l'appareil. Les réparations
doivent être effectuées uniquement par du personnel qualifié.
The Tropos 7320 router may contain a lithium-ion battery. To avoid the possibility of an
explosion, the router should
NOT
be exposed to any temperatures higher than
85 degrees C.
The RJ45 connectors of the Tropos 7320 router may source DC power on pins 4,5 and
7,8. The IEEE 802.3 standards allow for pins 4,5 and 7,8 to be used for Power Over
Ethernet. Some products may be incompatible with the Tropos Power Over Ethernet
capability. If such problems occur, make sure that the unit is configured with the Power
Over Ethernet capability set to Off (default setting). If problems persist, use Ethernet
cables that have no connections to the unused pins 4,5 and 7,8.
The Tropos 7320 router is installed in wet, outdoor locations. Make sure closure caps are
installed and all cable connections are securely fastened and waterproofed.
