TRONXY X5SA-400-2E, User Manual

Page: 23 / 32

Precautions for double extrusion printing operation:
Enter the manual menu, switch to E1, and set the moving length to 10 mm.
Click to enter consumables Nozzle with consumable extrusion
，
Click
return , the return length is 43mm.
Click E1 in the lower left corner to switch to E2, and the moving length is set to
10 mm. Click to enter consumables Nozzle with consumable extrusion
，
Clickreturn , the return length is 43mm.
After the above operations are completed, switch back to E1 and feed to the
nozzle again to discharge consumables
Note: the heating temperature of the PLA is 210
±
5 degree and
setting filaments return. When setting other kind of filaments, the
temperature should little higher, to avoid the molten part of
filaments its too big when it return, As a result, the filaments head is
too big for feeding.
19