![background image](http://html1.mh-extra.com/html/tronair/11a6647-1000/11a6647-1000_operation-and-service-manual_1171190047.webp)
28.5 VDC Ground Power Unit
Models:
11A6647-1000/1010
11B6647-1000/1010
11C6647-1000/1010
11D6647-1000/1010
11A6647C1000/1010
11B6647C1000/1010
11C6647C1000/1010
11D6647C1000/1010
11A6655-1000/1020
11B6655-1000/1020
11C6655-1000/1020
11A6655C1000/1020
11B6655C1000/1020
11C6655C1000/1020
11D6655C1000/1020
11A6665-1000/1010
11B6665-1000/1010
11C6665-1000/1010
11A6666-1000
11B6666-1000
11C6666-1000
12/2006 - Rev. 04
- 41 -
5.3
OPERATING THE SET (continued)
5.3.10 Setup
NOTE
It is assumed in the following description that the standard data is displayed (date,
mode, input, output) and that the user password (AJ), which was programmed in the
factory, has not been changed
1. The main menu is displayed by pressing “Shift” and “down arrow”
buttons simultaneously.
2. Display the “setup“ sub-menu by pressing the “up arrow“ or “down
arrow“ button and then the “Input“ function to confirm.
****** SETUP ******
SAVE NEW SETUP : NO
LOAD OLD SETUP : NO
or
3. Accept “save new“ with the “Up“ or “Down“ button if changes have to be
saved in BATTRAM.
Confirm “Write Set-up“ by pressing any button
or
change to the “load old“ input field with the “Input“ function and answer
“yes“ with the “Up“ or “Down“ button if the changes are not to be made in
the BATTRAM.
Confirm "Load Setup“ by pressing any button.
or
or
5.3 Operating the set continued on following page.