28.5 VDC Ground Power Unit
Models:
11A6647-1000/1010
11B6647-1000/1010
11C6647-1000/1010
11D6647-1000/1010
11A6647C1000/1010
11B6647C1000/1010
11C6647C1000/1010
11D6647C1000/1010
11A6655-1000/1020
11B6655-1000/1020
11C6655-1000/1020
11A6655C1000/1020
11B6655C1000/1020
11C6655C1000/1020
11D6655C1000/1020
11A6665-1000/1010
11B6665-1000/1010
11C6665-1000/1010
11A6666-1000
11B6666-1000
11C6666-1000
12/2006 - Rev. 04
- 15 -
4.4
STORAGE (continued)
4.4.1
Floor Loading Capacity
The weight of the equipment is distributed over a relatively small area; special care must
therefore be taken to ensure that the floor loading capacity is adequate. The exact value can be
obtained from the Technical Data (Section 2). If necessary, the supporting surface can be
reinforced by interposing a suitable steel plate. Please consult your architect or Tronair
representative if you require assistance.
4.4.2
Space Requirements/Dimensions
About 80 cm/32” clearance should be left in front of the unit to provide unimpeded access to the
cubicle. Local or general safety regulations, e.g. escape routes, should also be observed. In no
circumstances must the air inlet (around the top edge of the unit) and the air outlet (in the bottom
of the unit) be covered or obstructed.
4.4 Storage continued on following page.
1384 (54.5")
203 (8")
203 (8")
Figure 4.4.2
Dimensions & Space Requirements
28V DC GPU